Conference Papers
2010 |
Rheology of Polymer Blends and Nanocomposite Proceedings Article In: Summer School of the Romanian Society of Rheology, 2010. |
Thermal and Rheological Properties of Composites of Polyamide 6 and Halloysite Nanotubes Proceedings Article In: Gemeinsames Symposium der Deutschen Rheologischen Gesellschaft und der Deutschen Kolloid-Gesellschaft, 2010. |
Thermal and Viscoelastic Properties of Polyamide 6/Halloysite Composite Proceedings Article In: 6th Annual European Conference on Rheology (AERC 2010), 2010. |
Toughness Modification of Electron Beam Curable Epoxy Matrices for Carbon Fibre Composite Proceedings Article In: 2010 SAMPE Fall Technical Conference and Exhibits, 2010. |
Toughness modification of electron beam curable epoxy matrices for carbon fibre composite Proceedings Article In: SAMPE Fall Technical Conference Proceedings, 2010. |
Toughness modification of electron beam cured epoxy using a silver complex as initiator Proceedings Article In: Polywheel, 2010. |
Trends in polymeric foam Proceedings Article In: Cluster Nanotechnology, 2010. |
Dehnrheologie von Polymerschmelze Proceedings Article In: Bayreuther Kompetentztage - Polymerrheologie"Von der Flüssigkeit biz zum Festkörper", 2010. |
Development and optimalization of thermoplastic substrate materials for recyclable printed circuit board application Proceedings Article In: 14. International Scientific Conference"Polymeric Materials", 2010. |
Viskoelastische, bruchmechanische und Ermüdungsrissausbreitungseigenschaften von Blends aus Polyamid 6 und Styrolpolymere Proceedings Article In: Wintersymposium des Lehrstuhls für Polymerwerkstoffe, 2010. |
Dispersion of nanoparticles in a polymer matrix: new processing and characterization method Proceedings Article In: Cluster-Treffen “Nanomaterialien: Herstellungsprozesse und Anwendungen, 2010. |
Polymer materials for electret application Proceedings Article In: 2010. |
Organic liquids as blowing agents for blend system Proceedings Article In: 2010. |
Influence of manufacturing on the electret performance of commercial fluoropolymer grade Proceedings Article In: 2010. |
Nanotrends bei Polymerschäume Proceedings Article In: 2010. |
Morphological, thermal and viscoelastic properties of nanocomposites of PA 6 and nanotubes of the mineral halloysit Proceedings Article In: 2010. |
Toughness Modification of Electron Beam Curable Epoxy Matrices for Carbon Fibre Composite Proceedings Article In: 2010. |
Toughness modification of electron beam cured epoxy using a silver complex as initiato Proceedings Article In: 2010. |
Epoxy/Phenolic resin blend as matrix for RTM-manufactured carbon fibre reinforced composite Proceedings Article In: XII International Macromolecular Colloqium, 2010. |
Trends in polymeric foam Proceedings Article In: 2010. |
Dynamic Creep and Fatigue Performance of Dendric PIB-based Nanocomposite Proceedings Article In: 2010. |
Toughness modification of electron beam curable epoxy matrices for carbon fibre composite Proceedings Article In: 2010. |
Hyperbranched polymers as tougheners for fast curing epoxy resin system Proceedings Article In: 2010. |
Fatigue behavior of polymer blends and nanocomposites Proceedings Article In: 14th International Conference on Polymeric Materials, P.2010, Halle/Saale, Germany (2010)., 2010. |
Mechanical properties of core-shell rubber particles toughened epoxy resins and composite Proceedings Article In: 2010. |
Quality assurance aspects of modern preformin Proceedings Article In: 2010. |
Fast curing toughened epoxy resin systems for automotive application Proceedings Article In: 2010. |
Preforming quality assurance for high-performance fibre-reinforced composite Proceedings Article In: 2010. |
Fatigue crack growth in thermosetting polyurethanes. Effect of network structure and environmental conditions on the dynamic fatigue propertie Proceedings Article In: 2010. |
Dispersion of nanoparticles in a polymer matrix: new processing and characterization method Proceedings Article In: 2010. |
Characterization of the elastic properties of polymer-nanocomposites by creep-recovery experiment Proceedings Article In: 2010. |
Influence of the Molar Mass on the Thermal, Mechanical and Rheological Properties of Composites of Polyamide 6 and Halloysite Nanotube Proceedings Article In: 2010. |
The Innovation Potential of Polymer Foams Proceedings Article In: Blowing Agents and Foaming Processes, Smithers Rapra Technology Limited, Cologne, Germany, 2010, ISBN: 9781847354952. |
Rheologie mehrkomponentiger Polymerwerkstoffe: Grundlagen und Anwendun Proceedings Article In: 2010. |
Rheology of Polymer Blends and Nanocomposite Proceedings Article In: 2010. |
Viskoelastische, bruchmechanische und Ermüdungsrissausbreitungseigenschaften von Blends aus Polyamid 6 und Styrolpolymere Proceedings Article In: 2010. |
Thermal and Rheological Properties of Composites of Polyamide 6 and Halloysite Nanotube Proceedings Article In: 2010. |
Thermal and Viscoelastic Properties of Polyamide 6/Halloysite Composite Proceedings Article In: 2010. |
Hyperbranched polymers as tougheners for fast curing epoxy resin system Proceedings Article In: SAMPE Fall Technical Conference Proceedings, 2010. |
2009 |
Influence of organic additives on foam morphology of injection-moulded i-polypropylen Proceedings Article In: Blowing Agents and Foaming Processes, 11th International Conference, 2009. |
Influence of the microstructure on the foaming behavior of an immiscible blend Proceedings Article In: Annual Technical Conference - ANTEC, Conference Proceedings, pp. 950-954, 2009. |
Innovative Substrates for PCBs based on Thermoplastic Polymer Proceedings Article In: EIPC Summer Conference, St. Michael, 2009. |
Innovative resins with short curing cycles for the production of high performance composite Proceedings Article In: 4th International Symposium on Engineering Plastics, 2009. |
Integrative processing methods for polypropylene combining structural foam injection moulding and injection moulding compounding technologies Proceedings Article In: Advances in Polymer Science and Technology 1 - Proceedings of a conference on polyolefins and polymelamines, 2009. |
Linear and Nonlinear Rheology of PA 6 Composites with Silicate Nanotubes of the Mineral Halloysite Proceedings Article In: 5th Annual European Conference on Rheology, 2009. |
Mechanical and Fatigue Crack Propagation Properties of Reactively Compatibilized Blends of Polyamide 6 and Styrenic Polymer Proceedings Article In: 12. Problemseminar "Deformation und Bruchverhalten von Kunststoffen", 2009. |
Mechanical and rheological properties of polyamide 6 nanocomposites based on the mineral halloysite Proceedings Article In: 11th Biannual Bayreuth Polymer Symposium, 2009. |
Morphologische, mechanische und rheologische Eigenschaften von PA 6-Nanokompositen auf Basis von Silikat-Nanoröhrchen des Minerals Halloysit Proceedings Article In: 13. Problemseminar “Polymermischungen”, 2009. |
Influence of organic additives on foam morphology of injection-moulded i-polypropylen Proceedings Article In: 2009. |
Morphologische, mechanische und rheologische Eigenschaften von PA 6-Nanokompositen auf Basis von Silikat-Nanoröhrchen des Minerals Halloysi Proceedings Article In: 2009. |